JIB 18' Jony Jib With Extras

  • 2950.00 £
  • Published date: September 3, 2023
    • Swinton, Manchester, United Kingdom

JIB 18' Jony Jib With Extras


⭕ Clean cosmetic condition. It is separated into nine Pelican cases. The first case is the Kessler K-Pod Tripod. It has a newly mounted Matthews 4-axis leveling head with Mitchell mount. This can be switched back to the original 100mm bowl mount, if preferred. It has the standard pad feet that can be switched out for the locking pneumatic air tires or locking standard caster wheels. Also, in the first case is a c-stand and small tripod stand, both each with a Jony cradle for use to assemble and rest. The second case is the 18 JonyJib, which consists of five-4 foot sections, the yoke with a Mitchell mount, and IDX battery mount as well as the camera platform and brake. The jib heights refer to the maximum level of the camera platform with NO head. The Third Case has the Varizoom VZ-MC100 motorized head with controller. Currently, it has loomed into the head one HDMI, one BNC, the motorized head control cable, and two Redrock microRemote control cables. The are 5 included IDX batteries (with additional IDX battery) will power the motorized head via the IDX battery plate on the yoke and the monitor has its own built in IDX mount on its back. This allows for the head and monitor to be powered separately, however, they both can be powered with the yoke gallery plate using supplied cables. Depending on use, you can get between 3-4 hours of control and monitor power per IDX battery. This allows for the jib to be completely power independent. However, there are power adapters included for both the head and monitor if you wish to run house power (extension cables). There are two (2) Redrock microRemotes ENG Kits. These are some of the first ones on the market and are wired and wireless. The sets include two microRemote Torque Motors, two microRemote Fingerwheels, two microRemote Basestations, and cable kit for both sets. These could be used in a ENG setup, as well. Included is a lamented microRemote instruction manual I created. I have assembled a 15mm mounted cheese plate that has an IDX battery mount with multiple power outputs, d-tap and barrel ports, that allows for ease of use with a variety of cameras. Also included is second IDX dual battery charger and one more IDX battery, making the total 5. There are also several spare items included:
JonyJib Rear Control Frame
Kessler K-Pod Pneumatic All Terrain Wheels
Replacement 20 Pan and Tilt Extension Cord
Replacement Y-Cable for MC100
JonyJib Power Distribution Box
JonyJib Pin and Ring Assembly - 12 qty
SPARE Redrock Wired Fingerwheel Cable - 1 qty
JonyJib2 100mm Mounting Hub (Original Yoke)
Sand Bag - 5 lb
Sand Bag - 10 lb - 5 qty
Sand Bag - 20 lb - 4 qty
Also included, the MultiCart 8-in-1 Equipment Transporter R2 Micro and both the shelf and deck, for aid in transporting weights.
Lastly, I built a dolly using the K-Pods optional dolly wheels (bought an extra for 4) that the K-Pod actually fastens to it with knobs. I also incorporated the K-Pods pull handle to the dolly, which can also be attached to the K-Pods leg. Other accessories for the K-Pod are the 100mm low-boy mount, which allows a 100mm head to be mounted on a K-Pod leg, and the operator seat, which allows a person to ride on the K-Pod if using the K-Pod as a tripod only. The jib at full length can handle 30 pounds. Delivery available.

Phone number ✆ 0161 463 2580
Swinton, Manchester




Related listings