⭕ This CNC lathe has been little used and is in a great condition. It has been in light use up until Feb 07 and can be seen working. Note this is the only manufacture to offer a full CNC capable machine with 5 axis and the posibility of live tooling to be used on a single phase machine.
This machine comprises a cast iron base with two in line spindles mounted on a riged cast iron bridge. Below the spindles is mounted a slant gang slide with X and Y axis. Both spindles, main and sub, traverse on the same slides, independently of each other for Z and W axis. All axis use precision linear slides with linear scales feed back.
Main Spindle
Bar Capacity 16mm
Spindle Nose DIN 6343 type
Collet Type A705
C Axis Full 0.01 deg 360 deg
Speed 6000
Power 1kW/1hp
Sub Spindle
Bar Capacity 15mm
Spindle Nose DIN 6343 type
Collet Type A705
Speed 6000rpm
Power 0.75kW/1HP
Capacities
Max Distance from spindle to Gang slide 80mm
Distance between spindles 0 - 400mm
Max Machinable length 200mm
X axis Travel 290mm
Z axis Travel 210mm
W axis Travel 210mm
Y axis Travel 84mm
Rapid traverse 10m per min
Power Tooling up to 10,000 rpm
Positioning accuracy 0.003mm
Fagor CNC with colour CRT Fagor 8050T
Machine Dimensions 1200 x 850 x 1640mm
Weight 950kg
The Fagor control is very simular to Fanuc and the machine comes with all the manuals required. The programming is quite straight forward and has a fully colour CRT screen.
The machine is capable of live tooling and can have electrical or air powered tools.