⭕ BOXFORD DUET LATHE AND MILLING MACHINE CNC TRAINING MACHINE
THIS IS A TRANING CNC MILLING AND LATHE MACHINE,IF YOU ARE NEW TO CNC THIS COULD BE JUST THE THING.IT WILL TEACH YOU ALL ABOUT CNC MILLING AND CNC LATHE OR IDEAL FOR JUST MAKING SMALL PARTS
IF REQUIRED,ALL ASPECTS OF PROGRAMMING,PROGRAM EDITING AND SIMULATION OF MACHINING CAN BE PRACTISED WITHOUT THE PC CONNECTED TO THE DUET MACHINE.
THIS ENABLES TRAINING TO BE CARRIED OUT ON A NUMBER OF PCS SIMULTANEOUSLY;COMPLETED PROGRAMS CAN BE TRANFERRED TO A PC CONNECTED TO THE DUET FOR MACHINING AND PROGRAM VERIFICATION.
THIS ITEM IS AS NEW,I WOULD SAY ITS ONLY HAD A COUPLE OF HOURS USE
IT COMES WITH THE LAPTOP AND ALL BOXFORD SOFTWARE AND KEY AND THE LATEST SOFTWARE FROM BOXFORD.ALL WORKS PERFECT
ALSO INCLUDEDS ALL ACCESSORIES WHICH INCLUDES=
ALL INSTRUCTION BOOKS X 3
MILLING TABLE WITH FOUR T-CLAMPS
MILLING VICE WITH TWO REVERSIBLE JAWS
3 JAW CHUCK WITH 2 SETS OF JAWS
4-POSITION DRILLING/BORING TOOLHOLDER WITH BUSHES
LEFT HAND TURNING TOOL
PARTING-OFF TOOL
REVOVLEING CENTRE
SPINDLE CENTRE,DRIVER CARRIER
ONE 10MM BORE CUTTER HOLDER
TWO 5MM BORE CUTTER HOLDERS
CAM LOCK KEY (for securing milling table and drilling / boring toolholder)
THIS ITEM IS 240 VOLT SINGLE PHASE NORMAL HOUSEHOLD PLUG
LATHE MODE SPECS ARE=
SWING OVER BED (DIA) 225 MM 8.86
MAX TURNED DIA BETWEEN CENTRES 65 MM 2.6
SPINDLE BORE 20 MM 0.8
DISTANCE BETWEEN CENTRES 330 MM 13.0
TURNING DISTANE BETWEEN CENTRES 330 MM 13.0
TAILSDTOCK CENTRE ADJUSTMENT 100 MM 3.9
AXIS TRAVEL=
X 125 MM 4.9
Y 360 MM 14.0
ALSO HAS A 10 TOOL CHANGER
MILL MODE AXIS=
X 125 MM 4.92
Y 75MM 3.0
Z HEIGHT (CHUCK TO TABLE)
SPINDLE SPEED RANGE 200-2500 REV/MIN
RAPID TRAVERSE RATE 500MM/MIN 19.5/MIN
PROGRAMMABLE FEED RATE 0-500 MM/MIN 0-19.5 IN/MIN
SYSTEM RESOLUTION 0.01MM 0.0004
SPINDLE MOTOR 320W
DIMENSIONS
L 900 MM 35.5
W 455 MM 18
H 480 MM 19
WEIGHT 65 KG